This article provides a step-by-step guide for setting up a Group Device using the Fareclock mobile app. Group Devices are typically shared at worksites or kiosks where multiple workers clock in and out using a single device.

Step 1: Download the Fareclock App.

For more information on installing the app, refer to this help article.

Step 2: Admin Sign In

Step 3: Enter your Admin Email and Password linked to your Fareclock Console account, then tap ‘Log In’.

Step 4: After signing in, you’ll be prompted to set the Device Mode. Select ‘Group Device’, then assign a name to the device for easier identification in the Console.

While not required, admins can pre-create a Group Device profile from the Admin Console:

Step 1: Go to the Fareclock Admin Console and navigate to Operations. Under the Operations section, find and click Devices.

​

Step 2: Click the ‘Add Group Device’.

Step 3: Configure the settings based on the group device settings.

Then, during app setup, choose Reinstall and select the pre-provisioned group device to complete the setup.

Step 1: Admin Sign In

Step 2: Enter your Admin Email and Password linked to your Fareclock Console account, then tap ‘Log In’.

Step 3: After signing in, choose Reinstall and select the pre-provisioned group device to complete the setup.

Step 4: After tapping it, a list of devices will appear. Select the group device you previously created in the Console.

Step 5: Review the device details, and once confirmed, tap ‘Save’.